Fitting The Mattress; Preparing For Use; Tips For Use - Auping K2 Typ 79 Gebrauchsanweisung

3.5 Fitting the mattress

Put your bed in the horizontal position. Put the
mattress on the mesh base and centre it.
Make sure that the five protruding clip-on pins
of the anchors are pushed widthways into the
mesh (see fig. 5).
'Click' the anchors into the mesh at the
positions indicated (see fig. 6).
Make sure that the anchors are not directly
above a cross bar.
GB16
_008EJ_3152 BinnenW.pdf - pag.16

3.6 Preparing for use

Check that the mesh base can move freely.
Only adjust the mesh base while it is in a
horizontal position, securely fixed to the
supporting legs, or to the supports provided
within the bed surround.
Check that the mattress is attached to the
mesh base properly.
Insert the plug into the wall socket. The plug
has a safety cut-out.

3.7 Tips for use

A new mattress has a certain amount of
rigidity, which will disappear within a few days.
Consequently, your mattress will not optimally
follow the contours of the mesh base when it
is initially adjusted. We therefore recommend
that you lie down on the mattress while
adjusting the positions for the first time.
fig. 5
fig. 6
LET OP !!! Lage resolutie!
November 21, 2007