3. Preparing for use
Your dealer has installed your AVS
Superbox for you. The drive motors
should be fitted by an Auping specialist
only.
For other parts and detailed installation
instructions, we refer you to the
installation cards included with the
various parts.
3.1 Preparing for use
Check that the AVS Superbox can move
freely.
Only adjust the AVS Superbox while it is
in a horizontal position, securely fixed to
the supporting legs.
Put the plug into the socket.*
* If applicable.
_01J8C_4267 - BW.pdf - pag.17
4. Use
4.1 Use of electrically adjustable
sections (models M1/M2)
The remote control is used to adjust the
electrically adjustable sections.
1. Raise back section
2. Lower back section
3. Raise foot end*
4. Lower foot end*
5. Raise back section and foot end*
6. Lower back section and foot end*
Press one of the 'up' or 'down' buttons,
push the button until the desired
position is reached. Only one button can
be operated at a time.
4.2 Remote control with cable
Model M1
4.3 Infrared remote control*
Model M1
LET OP !!! Lage resolutie!
Model M2
Model M2
GB17
July 28, 2009