2. Safety instructions
■ The Match mesh base must only
■ The Match mesh base is only
■ The Match mesh base operates
■ Check that the voltage of the
■ Adjustable beds have moving
■ Only adjust the bed while you
■ Disconnect the bed from the
GB 4
be fitted and connected to the
electricity supply by an Auping
specialist.
suitable for use in the home.
on 24 V low-voltage current.
transformer is the same as the
mains voltage in the house.
parts. Make sure that your limbs
cannot become trapped.
are lying on it. Make sure that
no children are under the bed
while it is being adjusted.
power supply before cleaning.
Pull the plug out of the socket.
■ The mesh base is not a toy. Do
not allow children to play with
the bed.
■ Do not use the bed as a
trampoline or stepladder.
■ Use an Auping Match mesh base
in combination with an Auping
mattress.
■ Only place the bed in a dry
room. In view of the electrical
components it is not permitted
to place the bed in a damp
room.
■ Make sure that the cables
cannot become trapped. Check
this by adjusting the bed after it
has been installed.
■ Remove the plug from the
socket during a thunderstorm.