Milnor Mark II Handbuch Seite 9

Description of Controls—
Mark II, Q-Style Washer-Extractor
H/W
Manual Flush/Spray
switch—machines with
five-compartment supply
injectors
Hold this switch to H to flush water into
the first compartment of the supply
injector. Hold this switch to W to use the
spray nozzle to clean the supply injector.
f
Manifold Flush button
Press this button to flush the chemical
supply manifold with fresh water.
B/d
Alternate Drain switch
Set this switch to d to disable all
machine functions and hold the drain
closed. The machine can be powered off
with the drain closed for overnight
soaking. Set to B to permit normal operation.
_/-
Mildata Remote/Local switch—Mildata option
Set this switch to - to have the machine communicate with the Mildata computer. Set
to _ to use internal machine formulas.
E/e
Ampsaver switch—Ampsaver option
E causes the Ampsaver controller to delay extraction when necessary to prevent the
amperage drawn by all machines from exceeding a preset maximum. eprevents the
Ampsaver controller from affecting machine operation.
5
MSOUPQCTAE/9433AV (4 / 4)