Milnor Mark II Handbuch Seite 17

3_bbUSdY^W 5bb_bc±=Qb[ 99 GQcXUb 5hdbQSd_b
usually require accessing mechanical or electrical components. Request authorized service in
accordance with published safety information. See the safety manual.
RECOVERY: Request authorized service.
RECOVERY: Request authorized service. The message clears when the switch detects adequate
pressure.
RECOVERY: Request authorized service.
RECOVERY: Request authorized service.
RECOVERY: If the cylinder is stationary, request authorized service. The message clears when
the circuit closes.
RECOVERY: If the message returns, request authorized service.
RECOVERY: Request authorized service to check the cooldown system. The message clears
when cooldown temperature is reached.
A keypad key was stuck or shorted.
The brake pressure switch detected insufficient air pressure in the brake
release air cylinder to guarantee brake has released.
The level switch malfunctioned.
The steam or water temperature probe malfunctioned.
The speed switch circuit is open.
The machine recycled five times in a single extract step. The machine
attempts to balance the load by repeating the previous step.
The configured cooldown time was exceeded.
13
=C?E@EDC15 )$#&1F # $
—These errors