In-1 Multi-Purpose Sander Pmfs 200 A1; Introduction; Intended Use; Features - Parkside PMFS 200 A1 Originalbetriebsanleitung

3-IN-1 MULTI-PURPOSE SANDER
GB
PMFS 200 A1
CY

Introduction

Congratulations on the purchase of your
new appliance. You have selected a
high-quality product. The operating
instructions are part of this product. They contain
important information on safety, usage and
disposal. Before using the product, familiarise
yourself with all handling and safety guidelines.
Use the product only as described and for the
range of applications specified. Please also pass
these operating instructions on to any future owner.

Intended use

Depending on the sandpaper being used, this
appliance is suitable for the dry sanding of wood,
plastic, metal, filler and also painted surfaces.
The appliance is particularly suitable for corners,
edges and hard-to-reach areas. Any other usage of
or modification to the appliance is deemed to be
improper and carries a significant risk of accidents.
The manufacturer accepts no responsibility for
damage(s) resulting from improper usage. This ap-
pliance is not intended for commercial use.

Features

ON/OFF switch
Adaptor fitting
Reducer for external extraction appliance
Power cord
Tab (dust box)
Dust collection box
Release button for dust box
Clamping lever
Orbital sander plate
Clamping rails
Triangular sander plate
Screws (8x)
Random orbital sander plate
Speed selector
Rubber pin (8x)
2

Package contents

1 3-in-1 multi-purpose sander PMFS 200 A1

1 Random orbital sander plate with Velcro
fastener
1 Orbital sander plate with Velcro fastener
1 Triangular sander plate with Velcro fastener
2 Random orbital sander sheets (grain size
80/240)
2 Orbital sander sheets (grain size 80/240)
2 Triangular sander sheets (grain size 80/240)
1 Dust box
1 Reducer for external extraction appliance
8 Rubber pins (4x pre-installed)
8 Screws (4x pre-installed)
1 Operating instructions

Technical data

Nominal power input:
Rated voltage:
Nominal speed:
Nominal oscillation speed: n
Protection class:
Noise and vibration data:
Noise measurement value determined in accord-
ance with EN 60745. The A-rated noise level of
the power tool is typically as follows:
Sound pressure level L
PA
Sound power level L :
WA
Uncertainty K:
Wear hearing protection!
Weighted acceleration, typically:
Hand/arm vibration a
h
Uncertainty K = 1.5 m/s
NOTE
► The vibration level specified in these instructions
has been measured in accordance with the
standardised measuring procedure speci-
fied in EN 60745 and can be used to make
equipment comparisons. The specified vibration
emission value can also be used to make an
initial exposure estimate.
200 W
230 V ~ 50 Hz
n 7000–12000 rpm
0
14000–24000 rpm
0
II /
: 76 dB(A)
87 dB(A)
3 dB(A)
= 11.5 m/s 2
2
PMFS 200 A1