In-1 Multi-Function Sander Pmfs 200 C3; Introduction; Intended Use; Features - Parkside PMFS 200 C3 Originalbetriebsanleitung

3-IN-1 MULTI-FUNCTION
SANDER PMFS 200 C3

Introduction

Congratulations on the purchase of your
new appliance. You have chosen a
high-quality product. The operating instruc-
tions are part of this product. They contain important
information about safety, usage and disposal. Before
using the product, please familiarise yourself with all
of the operating and safety instructions. Use the prod-
uct only as described and for the range of applica-
tions specified. Please also pass these operating in-
structions on to any future owner.

Intended use

Depending on the sandpaper being used, this
appliance is suitable for the dry sanding of wood,
plastic, metal, filler and also painted surfaces.
The appliance is particularly suitable for corners,
edges and hard-to-reach areas. Any other usage of
or modification to the appliance is deemed to be
improper and carries a significant risk of accidents.
The manufacturer accepts no responsibility for
damage(s) resulting from improper usage. This ap-
pliance is not intended for commercial use.

Features

ON/OFF switch
Adapter fitting
Reducer for external extraction appliances
Mains cable
Dust bag
Dust box
Release button for dust box
Clamping levers
Orbital sander plate
Clamping rails
Delta sander plate
Screws (8x)
Random orbital sander plate
Speed selector
Rubber pin (8x)
Phillips screwdriver
│ GB │ IE │ NI │ CY
■ 2

Package contents

1 3-in-1 multi-function sander
1 Random orbital sander plate with Velcro fastener
1 Orbital sander plate with Velcro fastener
1 Delta sander plate with Velcro fastener
2 Random orbital sanding sheets
(grain size 80/240)
2 Orbital sanding sheets (grain size 80/240)
2 Delta sanding sheets (grain size 80/240)
1 Dust box
1 Reducer for external extraction appliances
8 Rubber pins (4x pre-installed)
8 Screws (4x pre-installed)
1 Phillips screwdriver
1 Set of operating instructions
Technical specifications
Rated power consumption: 200 W
Nominal voltage:
Rated idle speed:
Rated oscillation speed:
Protection class:
Noise and vibration data:
Noise measurement value determined in accor-
dance with EN 62841. The A-rated noise level of
the power tool is typically as follows:
Sound pressure level
Sound power level
Uncertainty
Wear ear muffs!
Rated acceleration, typically:
Hand/arm vibration a
h
Uncertainty K = 1.5 m/s
230 V ∼ 50 Hz
n 7000–12000 rpm
0
14000–24000 rpm
II /
L : 74.3 dB (A)
PA
L : 85.3 dB (A)
WA
K: 3 dB
= 5.428 m/s 2
2
PMFS 200 C3