In-1 Multi-Function Sander Pmfs 200 C3; Introduction; Intended Use; Features - Parkside PMFS 200 C3 Originalbetriebsanleitung

3-IN-1 MULTI-FUNCTION
SANDER PMFS 200 C3

Introduction

Congratulations on the purchase of your
new appliance . You have chosen a high-
quality product . The operating instructions
are part of this product . They contain important infor-
mation about safety, usage and disposal . Before
using the product, please familiarise yourself with all
of the operating and safety instructions . Use the
product only as described and for the range of appli-
cations specified . Please also pass these operating
instructions on to any future owner .

Intended use

Depending on the sandpaper being used, this
appliance is suitable for the dry sanding of wood,
plastic, metal, filler and also painted surfaces . The
appliance is particularly suitable for corners, edges
and hard-to-reach areas . Any other usage of or
modification to the appliance is deemed to be
improper and carries a significant risk of accidents .
The manufacturer accepts no responsibility for
damage(s) resulting from improper usage . This
appliance is not intended for commercial use .

Features

ON/OFF switch
Adapter fitting
Reducer for external extraction appliances
Mains cable
Dust bag
Dust box
Release button for dust box
Clamping levers
■ 2 │ GB │ IE
Orbital sander plate
Clamping rails
Delta sander plate
Screws (4x)
Random orbital sander plate
Speed selector
Rubber pin (4x)
Hex key

Package contents

1 3-in-1 multi-function sander
1 Random orbital sander plate with Velcro fastener
1 Orbital sander plate with Velcro fastener
1 Delta sander plate with Velcro fastener
2 Random orbital sanding sheets
(grain size 80/240)
2 Orbital sanding sheets (grain size 80/240)
2 Delta sanding sheets (grain size 80/240)
1 Dust box
1 Reducer for external extraction appliances
4 Rubber pins (pre-installed)
4 Screws (pre-installed)
1 Hex key
1 Set of operating instructions

Technical specifications

Rated power consumption 200 W
Nominal voltage
Rated idle speed
Rated oscillation speed
Protection class
230 V ∼, 50 Hz
n 7000–12000 rpm
0
14000–24000 rpm
II / (double
insulation)
PMFS 200 C3