Setting The Oscillating Speed; Working Procedures; Maintenance And Cleaning; Warranty - Parkside PMFS 200 A1 Originalbetriebsanleitung

Setting the oscillating speed

GB
You can set the desired oscillating speed using the
CY
speed selector
depends on the material being processed and can
be determined through practical tests.

Working procedures

■ Switch the appliance on before applying it to
the workpiece.
■ Apply minimal pressure when working.
■ Work at a constant speed.
■ Change the sanding sheets regularly.
■ Never sand different materials (such as wood
and then metal) using the same sanding sheet.
Optimum sanding results can only be achieved
by using clean sanding sheets.
■ Clean the sanding sheet every once in a while
using a vacuum cleaner.
■ Sand hard-to-reach places with the front or side
edge of the sanding sheet on the sanding plate.
■ Run the sander in parallel and overlapping
sanding motions over the workpiece.
■ After completing the task, lift the appliance from
the workpiece and then switch it off.

Maintenance and cleaning

WARNING!
► Always remove the plug from the mains
power socket before carrying out any work
on the appliance.
The multi-sander is maintenance-free.
■ Always clean the appliance immediately after
completion of work.
■ Use a dry cloth to clean the housing.
■ Remove any adhering swarf with a brush.
■ Never use sharp objects, petrol, solvents or
cleaning agents that can damage plastic. Do
not allow any liquids to get into the interior of
the appliance.
■ Keep the ventilation openings free of
obstructions at all times.
8
as required. The required speed

Warranty

This appliance is provided with a 3-year war-
ranty valid from the date of purchase. The ap-
pliance has been manufactured with care and
inspected meticulously prior to delivery. Please
retain your receipt as proof of purchase. In the
event of a warranty claim, please contact your
Customer Service unit by telephone. This is
the only way to guarantee free return of your
goods.
The warranty only covers claims for material and
manufacturing defects, not for damage sustained dur-
ing carriage, components subject to wear and tear
or damage to fragile components such as switches or
batteries. This appliance is intended solely for private
use and not for commercial purposes.
The warranty shall be deemed void in cases of
misuse or improper handling, use of force and modi-
fications/repairs which have not been carried out by
one of our authorised Service centres. Your statutory
rights are not restricted by this warranty.
The warranty period is not prolonged by repairs
effected under the warranty. This also applies to
replaced and repaired components. Any damage
and defects present at the time of purchase must be
reported immediately after unpacking, but no later
than two days after the date of purchase. Repairs
carried out after expiry of the warranty period shall
be subject to charge.

Service

Service Great Britain
Tel.: 0871 5000 720 (£ 0.10/Min.)
E-Mail: kompernass@lidl.co.uk
IAN 115767
CY
Service Cyprus
Tel.: 8009 4409
E-Mail: kompernass@lidl.com.cy
IAN 115767
Hotline availability: Monday to Friday from
8:00 a.m. to 8:00 p.m. (CET)
PMFS 200 A1