Storage; Disposal; Packaging; Trouble-Shooting - Silvercrest SV 125 B2 KAT Bedienungsanleitung

lose its shape over time. In this case, replace
it with a new one (included in the items sup-
plied).

9.2 Storage

WARNING! Risk of material damage!
During storage, the lid 12 must not be
locked, but only loosely closed. Perma-
nent locking could damage seals 11
and 16.
• Figure B: Wind the power cable 6
around the cable spool 23 at the un-
derside of the device. Please note the
arrows, which indicate the direction for
winding the cable.
• Store the device so that it is protected
against dust and dirt and out of the
reach of children.

10. Disposal

This product is subject to the
provisions of European Direc-
tive 2012/19/EC. The sym-
bol showing a wheelie bin
crossed through indicates
that the product requires sep-
arate refuse collection in the European Un-
ion. This applies to the product and all
accessories marked with this symbol. Prod-
ucts identified with this symbol may not be
discarded with normal household waste, but
must be taken to a collection point for recy-
cling electric and electronic appliances.
This recycling symbol marks
e.g. an object or parts of the
material as valuable for recy-
cling. Recycling helps to re-
duce the consumption of raw
materials and protect the environment.

Packaging

When disposing of the packaging, make
sure you comply with the environmental reg-
ulations applicable in your country.

11. Trouble-shooting

If your device fails to function as required,
please try this checklist first. Perhaps there is
only a minor problem, and you can solve it
yourself.
DANGER! Risk of electric
shock!
Do not attempt to repair the device
yourself under any circumstances.
Fault
•
No function
•
Seams are
not tight. •
•
•
Device does
not seal sev-
eral bags in a
row.
Possible causes /
Action
Has the device been
connected to the power
supply?
Ensure that the film bag
is positioned smoothly
between the sealing
strip 10 and the weld-
ing wire 17.
The film was damp or
contaminated at the
seam.
For moist food, activate
the Wet function
To protect the device,
an automatic lock is
briefly activated be-
tween two sealing pro-
cesses.
GB
1.
13