Activating The Sleep Function - Dometic FRESHWELL FW 3000 Bedienungsanleitung

FreshWell3000
Cancelling timer settings
If you have set the timer, you can cancel these settings as follows:
➤ Press the
button four times.
✓ The timer symbol disappears.
✓ The setting has been cancelled.
8.9

Activating the Sleep function

I
NOTE
The sleep function is deactivated in "Circulating air" (
"Dehumidifying" ( ) modes.
When the sleep function is activated, the set temperature is modified by 1 °C after
one hour and by 2 °C after two hours to ensure a pleasant temperature for sleeping.
➤ Set the required temperature (see chapter "Setting the temperature" on
page 20).
➤ Press the
button.
✓ The
symbol appears in the display.
The sleep function is activated.
➤ To deactivate the sleep function press the
I
NOTE
The sleep function is deactivated if the MODE button is pressed.
EN
Operating the under-bench air conditioner
button again.
) and the
23