Using The Remote Control; Hint For Improved Use - Dometic FRESHWELL FW 3000 Bedienungsanleitung

Operating the under-bench air conditioner
8.2

Using the remote control

The remote control must be pointed at the IR receiver (fig. 2
receiver during operation.
When a button is pressed, the value is transmitted directly to the under-bench air
conditioner. The under-bench air conditioner confirms the receipt of data with a high
note.
Switching only the remote control to or from stand-by
In stand-by mode, the remote control display shows only the time.
If the remote control is not pointing to the IR receiver (fig. 2
control panel, you can activate the remote control or switch it to stand-by
independently from the under-bench air conditioner:
➤ Press the
button.
8.3

Hint for improved use

The following hints will optimise the performance of your under-bench air
conditioner:
Improve the heat insulation of your vehicle by sealing gaps and hanging reflective
blinds or curtains on your windows.
If the vehicle has been subjected to direct sunlight for a long time: Operate the
under-bench air conditioner in the "Circulating air" (
open for a while before switching on the "Cooling" (
Avoid opening doors and windows as far as possible in the "Cooling" (
mode.
Select an appropriate temperature and blower speed.
Align the air nozzles sensibly.
Make sure the air nozzles and intake grille are not covered by cloths, paper or
other objects.
Clean the air filter periodically.
18
FreshWell3000
page 2) on the
4,
page 2) on the
4,
) mode with the windows
) air conditioning mode.
)
EN