Activating The Sleep Function; Activating The "I Feel" Function - Dometic FRESHLIGHT FL1600 Bedienungsanleitung

Dometic FreshLight
9.10

Activating the sleep function

When the sleep function is active, the set temperature is reduced by 1 °C after one
hour and by 2 °C after two hours to generate a pleasant temperature for sleeping.
➤ Set the required temperature (see "Setting the temperature" on page 26).
➤ Press the SLEEP button.
✓ The
symbol appears in the display.
The sleep function is activated.
9.11

Activating the "I feel" function

When this function is active, the remote control measures the room temperature and
transmits this measurement to the roof air conditioner every 10 minutes. The roof air
conditioner adapts the target value to this measurement.
➤ Press the I FEEL button.
➤ Position the remote control so that it points at the IR receiver (fig. 2 4, page 3)
on the control panel. Otherwise, the values cannot be transmitted to the roof air
conditioner.
I
NOTE
The remote control should not be kept in a part of the room that is
considerably warmer or colder than the average room temperature. It
may not, for example, be left in the sun or in front of the roof air
conditioner.
EN
Operating the roof air conditioner
29