Activating The Sleep Function; Replacing The Remote Control Batteries - Dometic FreshWell2000 Bedienungsanleitung

Operating the under-bench air conditioner
➤ Switch the under-bench air conditioner to stand-by.
Cancelling timer settings
If you have set the timer, you can cancel these settings as follows:
➤ Press the TIMER button five times.
✓ The timer symbol disappears.
✓ The setting has been cancelled.
8.9

Activating the Sleep function

When the sleep function is activated, the set temperature is modified by 1 °C
after one hour and by 2 °C after two hours to ensure a pleasant temperature
for sleeping.
➤ Set the required temperature (see chapter "Setting the temperature" on
page 22).
➤ Press the SLEEP button.
✓ The
symbol appears in the display.
The sleep function is activated.
8.10

Replacing the remote control batteries

Replace the batteries if you see the
The battery compartment is on the back of the remote control.
➤ Gently push down the lid of the battery compartment and slide it open in
the direction of the arrow.
➤ Insert the new batteries (2x type AAA) in the remote control as indicated
in the battery compartment.
➤ Close the cover of the battery compartment.
B
Protect the environment!
Do not dispose of any batteries with general household waste.
Return defective or used batteries to your retailer or dispose of
them at collection points.
24
symbol on the display.
FreshWell2000
EN