Operating The Under-Bench Air Conditioner; Basic Notes On Operation - Dometic FRESHWELL FW 3000 Bedienungsanleitung

FreshWell3000
Set the remote control
➤ Insert the batteries (see chapter "Replacing the remote control batteries" on
page 24).
✓ The display shows all symbols for 5 seconds.
➤ Press simultaneously the
✓ The display shows the default model number.
➤ Press simultaneously + and – button within 3 seconds to select the model
number:
– FreshWell3000: 02
– FreshJet: 07
– FreshLight: 11
✓ The display shows all symbols for 5 seconds.
✓ The remote control is ready for operation.
8 Operating the under-bench air
conditioner
8.1

Basic notes on operation

The under-bench air conditioner has three operating modes:
Operating mode
Stand-by
On
The receiver switches on when it receives pulses from the remote control. The
display shows (flashing) the temperature setting, after 10 seconds the display shows
the room temperature, then it switches off.
You can use the remote control to
switch the under-bench air conditioner to and from stand-by mode.
adjust the settings
select additional functions
EN
button and the
Features
The under-bench air conditioner is ready for operation and can be
switched on with the remote control.
The under-bench air conditioner is conditioning the air in the interior.

Operating the under-bench air conditioner

button during this 5 seconds.
17