Pumped Liquids; Installation; Safety Symbols On The Pump; Changing The Control Box Position - Grundfos MAGNA1 Bedienungsanleitung

3. Pumped liquids

Warning
The pump must not be
used to pump
flammable, combustible
or explosive liquids.

4. Installation

4.1 Safety symbols on the pump

Observe the position of
the clamp before the
clamp is tightened.
Incorrect position of the
clamp will cause leakage
from the pump and
damage the hydraulic
parts in the pump head.
Fit and tighten the screw
holding the clamp to 8
Nm ± 1 Nm. Note: Do not
apply more torque than
specified even though
water is dripping from
the clamp. The water
(condensed) is most
likely coming from the
drain hole under the
clamp.
6

4.2 Changing the control box position

Warning
Observe local
regulations setting limits
for manual lifting or
handling.
Warning
Before dismantling the
pump or related parts,
drain the system and
close the isolating
valves on both sides of
the pump as the pumped
liquid may be scalding
hot and under high
pressure.
Warning
When loosening the
clamp, do not drop the
pump head.
Warning
Risk of escaping vapour.