Herunterladen Inhalt Inhalt Diese Seite drucken

IKA LR 1000 basic Betriebsanleitung Seite 49

Vorschau ausblenden Andere Handbücher für LR 1000 basic:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 9
Now you can remove the anchor stirrer as shown in Fig. 25.
All O-rings can now be carefully removed by hand or using a
blunt tool for cleaning too.
Wear protective gloves during cleaning the instrument.
Electrical devices may not be placed in the cleaning
agent for the purpose of cleaning.
Do not allow moisture to get into the equipment when
cleaning.
Please consult IKA before using any cleaning or decon-
tamination methods, other than those recommended
here.
The handles cannot be place in the cleaning agent for
cleaning.
The only cleaners or disinfectants that may be used are
those that:
- lie in the pH range 5 - 8,
- contain no corrosive alkalis, peroxides, chlorine com-
pounds, acids or brine.
All product contacting components are suited for
cleaning in the laboratory dish washers.
Only clean IKA appliances using these IKA approved clean-
ing agents.
Dirt
Dyes
Building materials Water containing detergent, Isopropanol
Cosmetics
Food
Fuels
Other materials
Spare parts order:
Fig. 25
When ordering spare parts, please give:
machine type
serial number, see type plate
item number and designation of the spare part see
www.ika.com, spare parts diagram and spare parts list.
Repair:
Please send equipment for repair only after it has
been cleaned and is free from any materials which
may constitute a health hazard.
For repairing, please request the "Decontamination Cer-
tificate" from IKA, or download the printout of it from the
IKA website www.ika.com.
If you require servicing, return the equipment in its original
packaging. Storage packaging is not sufficient. Please also
use suitable transport packaging.
Cleaning agent
Isopropanol
Water containing detergent, Isopropanol
Water containing detergent
Water containing detergent
Please consult IKA
49

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Lr 1000 control

Inhaltsverzeichnis