Hazardous Zones - Olimpia splendid Ci2 Wall Handbuch Für Gebrauch Und Wartung

18. If the unit is unused for a long period, or no-one uses the climate-controlled
room, it is recommended to disconnect the electric power supply in order
to prevent accidents.
19. Do not use liquid or corrosive detergents to clean the unit, do not spray
water or other liquids onto the unit, since they could damage the plastic
components or even cause electric shocks.
20. Do not allow the appliance to function for long periods if humidity is high
and there are doors and windows open.
The humidity could condensate and wet or damage the furnishings.
21. Clean the appliance with a damp cloth; do not use abrasive products or
materials. See the appropriate paragraph for the filters cleaning.
22. Do not use the appliance in environments subject to significant temperature
changes as condensation could form inside the appliance itself.
23. Do not use the appliance if the filters are not positioned correctly.
24 Do not position equipment that produces naked flames in points exposed
to air currents or underneath the appliance.
25. Disassembly, repair or reconversion performed by an unauthorized person
could cause heavy damages and will cancel the manufacturer warranty.
26. Do not use the appliance if it breaks or malfunctions, if the electric power
supply cable is damaged or if there is any type of damage whatsoever.
Switch the appliance off, disconnect the electric power supply and have it
checked by qualified professional staff.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

0.5 - HAZARDOUS ZONES

• The fan coil must not be installed in environments with the presence of
inflammable gases, explosive gases, in very humid environments (laundries,
greenhouses, etc.), or in places with other machines that generate a strong
heat source, in proximity of a sources of salt water or sulphurous water.
• DO NOT use gas, gasoline or other inflammable liquids near to the fan coil.
• Only use supplied components (see paragraph 1.1). The use of non-standard
parts may cause water leaks, electric shocks, fires and injuries or damages
to things.
EN - 8