C - Dry Mode (Dehumidification); D - Using The Timer; Switch-On Timer; Switch-Off Timer - Olimpia splendid Ci2 Wall Handbuch Für Gebrauch Und Wartung

3.5.c - DRY mode (dehumidification)
a. Press the MODE key (P1) to select "DRY" mode.
b. Adjust the temperature with the ▲ and ▼ keys. The adjustment range is 17°C~30°C.
c. By pressing the ON/OFF key (P5), LED (5) on the appliance switches on. The appliance functions in the
dehumidification mode.
d. Switch the appliance off using the ON/OFF key (P5).
e. In dehumidification mode, the ECO and FAN SPEED functions are not available.

3.5.d - Using the timer

The switch-on and switch-off timers are respectively used to switch the appliance on and off and pre-set
times.
3.5.d.a - Switch-on timer
a. By pressing the TIMER ON key (P10), the SET, HOUR and ON icons on the remote control, switch on.
b. Press the key again to adjust the time.
c. The value increases by 0.5 hours every time the key is pressed. After 10 hours, the value increases by 1
hour every time it is pressed.
d. Half a second after setting, the remote control will send the switch-on command to the appliance.
3.5.d.b - Switch-off timer
a. By pressing the TIMER OFF key (P10), the SET, HOUR and ON icons on the remote control, switch on.
b. Press the key again to adjust the time.
c. The value increases by 0.5 hours every time the key is pressed. After 10 hours, the value increases by 1
hour every time it is pressed.
d. Half a second after setting, the remote control will send the switch-off command to the appliance.
3.5.d.c - Combined setting of the switch-on timer and the switch-off timer
a. Set the switch-on timer following steps 1 and 2 described in paragraph "3.5.d.a".
b. Set the switch-off timer following steps 1 and 2 described in paragraph "3.5.d.b".
c. If both times set do not exceed 10 hours, the switch-off timer will activate 0.5 hours after the switch-on
timer. If both times set exceed 10 hours, the switch-off timer will activate 1 hour after the switch-on timer.
d. Half a second after setting, the remote control will send the switch-on command to the appliance.
3.5.d.d - Modifying the timer
Press the corresponding key and adjust the switch-on and switch-off timer.
By setting the value at 0,00, the timer is deactivated.
The time set on the timer has relative value based on the remote control clock.
The clock cannot be adjusted when the switch-on timer or switch-off timer is active.
EN - 18