Technical Data - Aventics CVI Series Betriebsanleitung

Table 7: General data
General data
Min./max. working pressure
Temperature range
Mounting orientation
Permissible medium
Protection class according to EN
60529/IEC529
ATEX identification
Table 8: Technical data for the cylinder
Cylinder data
Cylinder
Type
Diameter
Mounting orientation
Stroke
AVENTICS | CVI/TUS | R412004532–BDL–001–AE

14 Technical Data

Because the cylinder valve unit can be freely configured, not all
technical data can be listed here.
You can find all technical data in the product catalog at
www.aventics.com/pneumatics.
This also applies to the 5/2-way solenoid valve (series 740) and
the 5/2-way or 5/3-way solenoid valve (series CD07), as well
as the optionally available coils with electrical connector
(series C01) and the sensors (SN6, ST6).
3 to 10 bar
−10°C to +50°C
−10°C to +45°C
Any
Max. particle size 50 μm
Oil content of compressed air 0 mg/m
Pressure dew point at least 15°C below the ambient and medium
temperature (max. at 3°C)
IP 65(only when assembled and with all plugs assembled)
See ATEX identification on page 55
Double-acting piston rod cylinder
with cushioning
32 – 200 mm
Any
See online product catalog from AVENTICS GmbH
(ATEX category 2G, 2D)
(ATEX category 3G, 3D)
3
– 5 mg/m
77
Technical Data
3