Product Overview - Aventics CVI Series Betriebsanleitung

10
Abb. 1: Overview of cylinder valve unit
1 Inlet connection
2 Coil with electrical connector
3 Exhaust port
4 End cover
5 Exhaust port
6 Throttle screws for cushioning
7 Manual override for solenoid valve
AVENTICS | CVI/TUS | R412004532–BDL–001–AE
5.3

Product overview

5 1
11 12
9 6
The following overview of the cylinder valve unit is a sample
drawing. This sample configuration consists of a TRB cylinder
and series CD07 valve with a solenoid coil. Depending on the
configuration, the cylinder valve unit can be equipped with
sensors (SN6, ST6) and attachments (e.g. a rod clevis).
3
8
8
8 Position of the throttle screws to adjust
piston rod speed (only for series 740
valves)
9 Front cover
10 Piston rod
11 Tie rod
12 Rating plate
57
About This Product
4
2
7
6
00135415