X-Ray Exposure - VATECH Green16 PHT-65LHS Handbuch

6.3

X-ray Exposure

1. Get out of the X-ray room and close the door.
2. Press and hold down the Exposure Switch until image acquisition is completed.
3. Release the Exposure Switch when "Image capturing is completed" message appears
on the screen.
4. Remove the MODEL out of the equipment.
Green 16 User Manual
Do not operate the PC during exposure. Doing so may cause the
system to malfunction.
Yellow: X-ray On
The image appears on the screen.
During X-ray exposure, the status appears as follows.
The LED light of the Exposure Switch turns yellow.

The LED light on the top of the equipment turns yellow.

An alert sound comes out to indicate that X-ray emission is

currently underway.
On Console Software, the radiation mark turns yellw and "X-RAY"

changes to "X-RAY ON".
6. Acquiring 3D MODEL Scan Images
85