Finishing The Scan; Checking The Captured Images - VATECH Green16 PHT-65LHS Handbuch

5. Acquiring CBCT Images
3. Release the Exposure Switch when "Image capturing is completed" message appears
on the screen.
5.4

Finishing the Scan

1. Open the Temple Supports and guide the patient out of the equipment.
2. For Normal Bite, remove the Sanitary Vinyl Cover from the Bite.
3. Press READY button to bring the Rotating Unit back to its initial position.
5.5

Checking the Captured Images

Acquired images can be reconstructed and converted to DICOM format.
The exported images can be confirmed in EzDent-i / EasyDent.
1. The images are transferred to EzDent-i / EasyDent automatically.
2. The images are automatically saved if automatic save option is configured as default. If
it is not configured as default, click Save button to save the images.
To check the image, double-click the one on the Patient List.
3.
Then, Ez3D-i / Ez3D Plus will run automatically for 3D viewing.
4.
80
During X-ray exposure, the status appears as follows.
The LED light of the Exposure Switch turns yellow.

The LED light on the top of the equipment turns yellow.

An alert sound comes out to indicate that X-ray emission is

currently underway.
On Console Software, the radiation mark turns yellw and "X-RAY"

changes to "X-RAY ON".
Refer to the EzDent-i / EasyDent User Manual for more information.
Green 16 User Manual