VATECH Green16 PHT-65LHS Handbuch Seite 69

4.2.4 Waters' view Mode
Patient Positioning
1. Turn the Nasal Positioner to the PA / Waters' view / Carpus mode mode Positioning
Marker as shown below.
2. Fold the Nasal Positioner up. The Nasal Positioner is not used in Waters' view mode.
3. Guide the patient to the CEPH unit.
4. Ask the patient to stand upright facing the sensor. Make sure that the patient's
shoulders are level and that his/her neck is relaxed.
Use the Column UP/DOWN button or switch option to adjust the height of the CEPH
5.
unit to approximately match the height of the patient.
6. During the operation, properly align the Ear Rods to the patient's ears so his/her head
does not move.
Green 16 User Manual
After adjusting the height of the column, align the Ear Rods to the
patient.
4. Acquiring CEPH Images (Optional)
61