Data Connectors And Pin Outs; Cable Bend Radius - NDS 55" RADIANCE G2 Benutzerhandbuch

Data Connectors and Pin Outs

1 RED 6 GND RED
2 GREEN 7 GND GREEN
3 BLUE 8 GND BLUE
4 N.C. 9 +5VDC
5 GND 10 SYNC GND
Pin Name Description
1 GND Ground (Y)
2 GND Ground (C)
3 Y Intensity (Luminance)
4 C Color (Chrominance)
Pin Name Description
1 NC No Connection
2 RXD N/C
3 TXD Flash and Serial Control Tx
4 NC No Connection
5 GND Ground
6 NC No Connection
7 NC No Connection
8 NC No Connection
9 RXD Flash Upgrade and Serial Control Rx
Note: The following cables are available from NDS.
1. Flash Upgrade Cable order part number: 35Z0009

Cable Bend Radius

We recommend that the bend radius of metallic cables be no less than 2.5 inches (63 mm) or 7 times
the diameter of the cable whichever is greater. The bend radius of Fiber Optic cables should be no
less than 10 times the diameter of the cable. Sharper bends may damage the cable and / or degrade
the video signal.
VGA
11 N. C.
12 DDC_SDA
13 HORIZ SYNC
14 VERT SYNC.
15 DDC_SCL
S-Video
Serial Control
DVI-I Supports digital and analog (RGBS / YPbPr).
Analog data appears on pin 8 and pins, C1 through C5.
* Compliant with DVI 1.0
PIN# SIGNAL
1 T.M.D.S. DATA 2-
2 T.M.D.S. DATA 2+
3 T.M.D.S. DATA 2/4
SHIELD
4 T.M.D.S. DATA 4-
5 T.M.D.S. DATA 4+
6 DDC CLOCK
7 DDC DATA
8 ANALOG VERT. SYNC
DVI 2 Only
9 T.M.D.S. DATA 1-
10 T.M.D.S. DATA 1+
11 T.M.D.S. DATA 1/3
SHIELD
12 T.M.D.S. DATA 3-
13 T.M.D.S. DATA 3+
14 +5V POWER
15 GND
Pin Name
Input Input
N/C
DVI-I*
Digital and Analog .
PIN# SIGNAL
16 HOT PLUG DETECT
17 T.M.D.S. DATA 0-
18 T.M.D.S. DATA 0+
19 T.M.D.S. DATA 0/5 SHIELD
20 T.M.D.S. DATA 5-
21 T.M.D.S. DATA 5+
22 T.M.D.S. CLOCK SHIELD
23 T.M.D.S. CLOCK+
24 T.M.D.S. CLOCK-
DVI2 Only
C1 ANALOG RED
C2 ANALOG GREEN
C3 ANALOG BLUE
C4 ANALOG HORIZ SYNC
C5 ANALOG GROUND
Description
Serial Video Data
N/C
8
18