Video Source - NDS 55" RADIANCE G2 Benutzerhandbuch

Video Source

Inputs Menu
Press the INPUT button twice to open the input menu. The Input menu shows a: P for primary input in the
left most column and an: S for secondary input in the column to the right of the cursor. Press the SCROLL
button to highlight the desired input. Finally, press fi button to make it the primary input or press fl to
make it the secondary input. The secondary input may be cleared by highlighting it using the SCROLL
button and pressing the fl button. Selecting a secondary input is optional. Note: Grayed out inputs are
not accessible.
The Input menu will automatically turn off 30 seconds after the most recent button press. It may also be
turned off by pressing the Input button.
The table below shows which inputs may be secondary when a given input is primary. Inputs marked with
an X in the secondary column may not be designated as the secondary input. The gray cells denote those
inputs that share a common connector or common electronics and thus may not used simultaneously.
DVI 2, RGBS, YPbPr and SOG 2 share the same input. Thus if one is selected as the primary input, the
others may not be selected as secondary. The same is true for Composite, SOG 1 and VGA.
Input
DVI 1
DVI 1
DVI Fiber
√
SDI 1
√
SDI 2
P
√
DVI 2
r
√
RGBS
i
√
YPbPr
m
√
S-Video
a
√
Composite
r
√
SOG 1
y
√
SOG 2
√
VGA
7
DVI Fiber SDI 1 SDI 2
√ √
√ √
√ √
√ √
√ √ √
√ √ √
√ √ √
√ √ √
√ √ √
√ √ √
√ √ √
√ √ √
Secondary
DVI 2 RGBS YPbPr SOG 2
√ √ √ √
√ √ √ √
√ √ √ √
√ √ √ √
√ √ √ √
√ √ √ √
√ √ √ √
√ √ √ √
S-Video Composite SOG 1
√ √ √
√ √ √
√ √ √
√ √ √
√ √ √
√ √ √
√ √ √
X √
X
√
√ √ √
√ √ X
VGA
√
√
√
√
√
√
√
√
√
X
√