Image Adjustments
Press this keypad button to adjust the Brightness, Contrast and / or the Backlight settings.
Adjust Brightness
Adjust Contrast
Adjust Backlight
5
Press the Brightness / Contrast button to display the Brightness control.
Press the fi or fl button to adjust
visible, press the Brightness / Contrast button again to access the
Secondary
brightness control.
Setting the brightness too high or too low will decrease the amount of
visible grayscales.
Press the Brightness / Contrast button twice, three times when a PIP
image is visible, to display the Contrast control. Press the fi or fl button
to adjust
Primary
contrast. When a PIP image is visible, press the
Brightness / Contrast button again to access the
control.
Setting the contrast too high or too low causes loss of some grayscales.
Color saturation may appear incorrect.
Press the Brightness / Contrast button three times, five times when a PIP
image is visible, to display the Backlight control. Press the fi or fl button
to set the backlighting.
Note: Lowering the backlight level will increase the backlight lifetime.
Primary
brightness. When a PIP image is
Secondary
contrast