Data Connectors And Pin Outs; Cable Bend Radius - NDS EndoVue Plus 24" Benutzerhandbuch

Data Connectors and Pin Outs

1 RED
2 GREEN
3 BLUE
4 N.C.
5 GND
Pin Name
1 GND Ground (Y)
2 GND Ground (C)
3 Y Intensity (Luminance)
4 C Color (Chrominance)
8
Pin Name
1 NC No Connection
2 RXD Receive Data, Touch Screen option
3 TXD
Flash, Touch Screen, and Serial Control Tx
4 NC No Connection
5 GND Ground
6 NC No Connection
7 NC No Connection
8 NC No Connection
9 RXD
Flash Upgrade and Serial Control Rx
Note: The following cables are available from NDS.
1. Flash Upgrade Cable order part number: 35Z0009

Cable Bend Radius

We recommend that the bend radius of metallic cables be no less than 2.5 inches (63 mm) or 7 times
the diameter of the cable whichever is greater. Sharper bends may damage the cable and / or
degrade the video signal.
15
VGA
6 GND RED 11 N. C.
7 GND GREEN 12 DDC_SDA
8 GND BLUE 13 HORIZ SYNC
9 +5VDC 14 VERT SYNC.
10 SYNC GND 15 DDC_SCL
S-Video
Description
Serial Control
Description
DVI-I supports digital and analog (RGBS/YPbPr).
Analog data appear on pin 8 and pins, C1 through C5.
* Compliant with DVI 1.0
PIN# SIGNAL
1 T.M.D.S. DATA 2-
2 T.M.D.S. DATA 2+
T.M.D.S. DATA 2/4
3
SHIELD
4 T.M.D.S. DATA 4-
5 T.M.D.S. DATA 4+
6 DDC CLOCK
7 DDC DATA
8 ANALOG VERT. SYNC
9 T.M.D.S. DATA 1-
10 T.M.D.S. DATA 1+
T.M.D.S. DATA 1/3
11
SHIELD
12 T.M.D.S. DATA 3-
13 T.M.D.S. DATA 3+
14 +5V POWER
15 GND
DVI-I*
Digital & Analog
PIN# SIGNAL
16 HOT PLUG DETECT
17 T.M.D.S. DATA 0-
18 T.M.D.S. DATA 0+
T.M.D.S. DATA 0/5
19
SHIELD
20 T.M.D.S. DATA 5-
21 T.M.D.S. DATA 5+
22 T.M.D.S. CLOCK SHIELD
23 T.M.D.S. CLOCK+
24 T.M.D.S. CLOCK-
RGBS & YPbPr (DVI)
C1 ANALOG RED
C2 ANALOG GREEN
C3 ANALOG BLUE
C4 ANALOG HORIZ SYNC
C5 ANALOG GROUND