Display Setup; Sdi Picture Menu; S-Video And Composite Picture Menu - NDS 55" RADIANCE G2 Benutzerhandbuch

Display Setup

HD SDI Picture Menu
SD SDI, S-Video, and
Composite Picture Menu
Horizontal Position:
Moves the image to the left or right. Press fi or fl to horizontally center the image.
Vertical Position:
Moves the image up or down. Press fi or fl to vertically center the image.
Sharpness:
Press fi or fl to adjust the sharpness (focus) of the displayed image.
Overscan:
0 = The image is displayed at a size that fills the screen without losing any video information. The image
presented to the display may include black bars top and bottom or left and right.
1, 2, 3, 4, 5 or 6 = The image is linearly enlarged, while remaining centered, in incremental steps. As the
image becomes larger video information will be lost from the top and bottom and / or left and right.
Select using fi or fl buttons.
Aspect:
Pressing the fl button changes the aspect ratio of the image from 4:3 to 16:9 or from 16:9 to 4:3. Note:
Displaying a 4:3 image in 16:9 causes its elements stretched horizontally. Likewise, displaying a 16:9
image in 4:3 causes its elements to be compressed horizontally.
SmartSync™
On initialization NDS' proprietary SmartSync technology examines the incoming signal and automatically
displays the video image in its proper format. To run SmartSync highlight the SmartSync / Aspect
parameter and press the fi button.
Mirroring:
Pressing the fi or fl button presents the displayed image swapped from right to left and displays a
mirroring indicator in the lower right corner. Pressing the fi or fl button again returns the image to its
normal left to right orientation and removes the mirroring indicator
10