Color Menu
Gamma:
Press fi or fl to select a preset Gamma (1.8, 2.0, 2.2,
Notes:
1.
Video
is a color corrected Look Up Table (LUT).
2.
PACS
is a DICOM-like LUT. Note: This product is capable of displaying Radiology (PACS) images for
reference, not diagnostic, purposes only.
Color Temperature:
Press the fi or fl button to select a preset color temperature. Note: When a preset is selected and any
parameter is changed, the current values are copied to the User presets and
Red, Green, Blue:
Press the fi or fl button to increase or decrease the intensity of the selected color.
Saturation:
Press fi or fl to set the saturation (color intensity) of the image.
Hue:
Press fi or fl to set the hue (color tint) of the image.
Brightness:
Press the fi or fl button to adjust brightness. This is a duplicate of the Brightness control described on
page 5.
Contrast:
Press the fi or fl button to adjust contrast. This is a duplicate of the Contrast control described on page 5.
Video Level:
Normal:
Provides a dynamic range equivalent to the incoming signal with no change.
Expanded:
Expands the signal level such that an input signal with range 16 (black) to 235 (white) will be
expanded to a range of 0 (black) to 255 (white). Note: If a signal is already full range (0 to 255), changing
the setting to
Expanded
Press the fi or fl button to select.
13
will cause the signal to "clip" or "saturate".
2.4
or 2.6),
Video
or
PACS
User
is selected.