Control; Quick Select - NDS 55" RADIANCE G2 Benutzerhandbuch

Control

A 6 button keypad, located bottom right on the front of the display, allows the user to make adjustments
to various display parameters using the On Screen Menu (OSM) system. To display the standard input
menu, press the INPUT button twice.
4

Quick Select

The QUICK SELECT menu, shown below, is displayed when the keypad's INPUT button is pressed once. If
the current input is one of the five shown in the QUICK SELECT menu, it will be illuminated. Select one of
these inputs by pressing the keypad button under the QUICK SELECT key that points to it. For example:
To select DVI-1, press the MENU button under the DVI-1 label. If a selection is not made the QUICK
SELECT menu closes after 10 seconds. The QUICK SELECT menu closes 30 seconds after the last selection
is made. Quick Select changes only the Primary input. If a Secondary input is being displayed and the
input chosen with Quick Select is the same as the Secondary input, then the PIP image will be cleared and
the chosen input will become the Primary input.
Accessing the full input menu is described on page 7.
4