Bartscher 600 series Bedienungsanleitung Seite 35

Electric oven heating elements (fig. 12, p. 5)
In order to replace the heating elements in the oven, extract the steel rod grill, the sole (1), the upper
diffuser and the grill holders. Then loosen the screws (2) fixing the heating element to be replaced
(3) and take it out from its support on the opposite side. Remove the heating element together with
the wiring, and disconnect it.
Information for electrical and electronic devices used in EU countries
According to EU directives, devices marked with the following symbol , may not be disposed
of together with normal household waste.
To dispose of your used device, please use the locally available differentiated collection system or
consult your retailer when you buy an equivalent product.
By actively using the provided collection systems, you are contributing to the reuse, recycling and
enhancement of electrical or electronic devices and protecting the environment and health.
Abusive product disposal is punishable by law in accordance with current legislation.
WHEN REPLACING ANY COMPONENTS ONLY ORIGINAL PARTS SUPPLIED BY
THE MANUFACTURER SHOULD BE USED. THE WORK SHOULD BE CARRIED OUT
BY AUTHORIZED PERSONNEL.
THE MANUFACTURER RESERVES THE RIGHT TO MODIFY ANY OF THE
FEATURES OF THE APPLIANCES DESCRIBED IN THIS MANUAL WITHOUT
NOTICE.
Pag. 34/45