Geometry; Standard Search Selection; Save Spectrum - ColorLite Rugged 2 Bedienungsanleitung

Geometry

6.7 Geometry
The measuring head version or geometry can be set in the
menu „Geometry".
Attention: Do not make any changes Attention: Do not make any changes
at the Rugged 2. at the Rugged 2.
There is only one measuring geometry
permanently installed.
The function „Stray light suppresion" can be activated
here.
To access the menu, select the „Geometry" dialog in the
„Settings" menu.
The "Stray light suppression" measures any ambient
light that might be entering the probe head. This "stray"
light can aff ect the reproducibility and so this option should
be used if the opening of the sensor is not fully covered
by the sample or especially when measuring transparent
materials such as glass or translucent materials. To activate
the "Stray light suppression", proceed as follows:

6.8 Standard search selection

The ColorLite Rugged 2 off ers the user three methods
of selecting a standard from the memory. Change which
method to use in the menu "Settings" opening the window
"Standard selection" The three options are:
• "By index" selection is made by entering the index
number of the standard.
• "By list & Best Match" names of standards are listed
or measure any colour and the device fi nds the best
matching standard colour.
• "By name" enter the name of the standard.

6.9 Save spectrum

Here you have the option to set the checkbox to store the
entire spectrum. Confi rm with „Center". The checkbox is
set.
ColorLite GmbH | Rugged 2
Please choose "Geometry" from
menu "Setting". Turn on the "Stray
light suppression" by selecting
the appropriate menu item and
confi rm.
63