To display the results in diff erent colour scales,
To display the results in diff erent colour scales,
To display the results in diff erent colour scales,
To display the results in diff erent colour scales,
To display the results in diff erent colour scales,
To display the results in diff erent colour scales,
press the Navigation
Which colour scales are available can be selected
in the "Settings" – "Colour systems" –
"Sample" menu
[see 6.2 Colour
To make a quick assessment of measured
samples, use the "PASS/FAIL" option
Pass/Fail].
5.6
Save sample data
To save the measured sample data after measuring
press the „CENTER"
key.
Each sample can be assigned
an exclusive name. This
name can consist of up to 20
characters, digits or letters.
Each character is selected
using the navigation buttons
using the navigation buttons
using the navigation buttons
using the navigation buttons
using the navigation buttons
using the navigation buttons
"Center"
Select the
a menu with the last used
names.
These names can be edited to
create a new name. If the last
character is a number it will
be automatically increased by
1 digit
keys.
systems].
[see 6.4
and entered using the
key.
symbol to open
ColorLite GmbH | Rugged 2
Pressing the "Left"
delete the last character. To
complete the entry, select the
character and press "Center"
key.
6
Settings
In the Settings menu, system and measurement
parameters are changed. The navigation in the menu tree
and the selection of individual menu items and parameters
and the selection of individual menu items and parameters
and the selection of individual menu items and parameters
and the selection of individual menu items and parameters
and the selection of individual menu items and parameters
and the selection of individual menu items and parameters
are described - as in the previous chapters - with the
and
keys. Abort settings using the "LEFT"
6.1
System settings
Select from the top menu level "Settings" and then select
"System".
Save sample data
key will
key.
55