Auto-Power-Off; Date And Time Settings - ColorLite Rugged 2 Bedienungsanleitung

Settings
4.6

Auto-Power-Off

To save battery charge when not in use the Rugged 2 is
programmed to automatically shut down when no keys are
pressed or measurements made.
The auto-power-off is normally activated another 5
minutes after the screensaver. To switch the device back
into operation pressed the "Trigger" button.
After the device has been switched off all settings
remain activated, also the active standard remains
loaded.
If the Rugged 2 is used with an optional external
power supply the auto-power-off function can be
deactivated.
4.7

Date and time settings

Use the navigation keys
select "Settings" in the top menu
level.
Press the "CENTER"
open "Settings" window.
to
Alternatively by pressing the
routine to the left, modifi cation will not be adopted.
After setting, the date line is highlighted. By pressing After setting, the date line is highlighted. By pressing
the key "Left"
key to
level menu.
Set the time in exactly the same way.
ColorLite GmbH | Rugged 2
Use the navigation keys
to select "System" in the
settings window.
Press the "CENTER"
open system window.
Select "Date" from the menu
and confi rm option with the
"CENTER" key.
The fi rst digit is highlighted.
Set the correct number using Set the correct number using Set the correct number using Set the correct number using Set the correct number using Set the correct number using
the keys . Move the
cursor right to the next digit cursor right to the next digit
with the Key. Set the date
in this manner and leave the
routine by shifting the cursor routine by shifting the cursor
to the right with the
key and leaving the
twice navigate back to the main top
key to
key.
47