Observer Angle; Illumination - ColorLite Rugged 2 Bedienungsanleitung

Change stored limit values:
1. Download the standard you want to change via the
menu item „select standards" in the „Measure"
menu.
2. Select „Settings" and then „Pass / Fail"
Function
3. Change the limits as before.
If you leave the menu, a message appears asking if
the limit of the loaded standards should be changed.
Press Enter to confi rm. This query window only
appears if a standard has been loaded from memory.
6.5

Observer angle

You have the option to choose between a 2 degree or
10 degree observer.
The selection is made in
the "Settings" menu. The
active value is displayed on
the "Angle" menu line. The
default setting is "10°".
62
6.6

Illumination

The standard illuminant for calculating the colour value
scan be selected here.
ColorLite GmbH | Rugged 2
Observer angle
Use the up/down arrow keys
to select the observer angle and
confi rm your selection by pressing
"Center".
The active standard illuminant is
displayed in the menu position
"Illumination". The default setting
is the Daylight illumination "D65".
From main menu, choose
"Settings" and then
"Illumination". Confi rm your
selection with the "Center" key.
In the following window you can
choose between several standard
illuminants.