Loading A Standard; Loading A Standard "By Index; Loading A Standard "By List & Best Match - ColorLite Rugged 2 Bedienungsanleitung

5.4

Loading a standard

To load a standard colour from the memory, open the
window "Measure" from the top menu level.
Open window "Select standard". The next step is to
select the folder local or cloud standard with
the navigation keys where the standard is stored
by pressing the "CENTER"
The ColorLite Rugged 2 off ers the user three The ColorLite Rugged 2 off ers the user three
methods of selecting a standard from the methods of selecting a standard from the
memory. Change which method to use in the
menu "Settings" opening the window "Standard
selection" The three options are:
• "By index" selection is made by entering the
index number of the standard.
• "By list & Best Match" names of standards are
listed or measure any colour and the device fi nds
the best matching standard colour.
• "By name" enter the name of the standard.
key.
ColorLite GmbH | Rugged 2
5.4.1

Loading a standard "By index"

Enter the standard index number
using navigation keys
standard name, values and date of
storage is displayed.
Select the standard using the " Select the standard using the "Center"
routine using the "Left"
5.4.2 Loading a standard "By list & Best Match"
After selecting the folder where
the standard is stored, a list of
available standards in the folder is
displayed. To load, scroll through
the standards using the navigation the standards using the navigation the standards using the navigation the standards using the navigation the standards using the navigation the standards using the navigation
"Center"
Or simply scan unknown colour by pressing the „Trigger
button" to start the measurement. The software
compares the scanned colour to the stored standards in
the folder and automatically jumps to the nearest or "best
matching" colour. This can be loaded using the "Center"
key.
. The
key. Abort the
key.
keys and select using the
key.
53