Device overview
3
Device overview
3.1
Operating and display elements
Fig. Device overviews Rugged 2
3.2
Probe heads
The probe head is fi xed to the control unit. With this
probe head the sample is illuminated at an angle of 45°
and the diff use refl ected light measured at an angle of
0°. For a d/8° probe head, the sample is illuminated
with diff used light and measured at an 8° angle.
For a d/0° probe, the sample is illuminated with
diff used light and measured at a 0° angle.
Fig. – Probe head
ColorLite GmbH | Rugged 2
43