Loading A Standard "By Name; Sample Measurement - ColorLite Rugged 2 Bedienungsanleitung

5.4.3 Loading a standard "By name"

The third method is by name; in
this mode the software checks the
available names and lists only the
characters that come in question.
This makes loading a standard
quick and very easy.
A short message communicates that the standard has
been successfully loaded.
The device automatically returns to
the "Scan sample" window and the
active standard is displayed in the
status bar.
5.4.4 Load a standard using the integrated data
matrix scanner (optional)
Automatically load any reference colour stored in the
internal memory. The name of the standard can be up to
20 characters and must be stored with exactly the same
spelling as on the digital code.
This allows for a extremely simple handling. Scan -
measure and print (optional bluetooth printer) the results
in three simple steps.
54
5.5

Sample measurement

Before measuring a sample a reference standard
colour must be measured
measurement]
Open from the main menu the "Measure" window.
Move the cursor to the "Scan sample" position using
the navigation
Place the probe head on the sample
handling]. The sample can now be scanned by
pressing the "Trigger button".
ColorLite GmbH | Rugged 2
[5.2 Standard
or selected from the internal memory.
keys.
[see 4.9
The results are displayed.