ColorLite Rugged 2 Bedienungsanleitung Seite 51

Which colour scales are available can be selected in
the "Settings" – "Colour systems" - "Standard"
menu [see 6.2 Colour systems].
To leave the window and return to the "Measure" level,
press the "LEFT" key.
To continue and use the standard, press the "CENTER"
key. Each standard can be assigned an exclusive name.
This name can consist of up to
20 characters, digits or letters.
Each character is selected using Each character is selected using Each character is selected using Each character is selected using Each character is selected using Each character is selected using
the navigation buttons
entered using the "CENTER"
k ey.
Select the
menu with the last used names.
These names can be edited to
create a new name. If the last
character is a number it will be
automatically increased by 1 digit
and
symbol to open a
ColorLite GmbH | Rugged 2
Pressing the "LEFT"
delete the last character.
To complete the entry, select the
character and press "CENTER"
In the dialog box "Save/Use standard" make the following
selection:
• Save and use
Save the standard with the given name in the standard
memory and then use.
• Use standard
The measured standard can be used by loading into the
working memory – this stays here until another standard
is loaded from the standard memory or a new standard is
measured.
• Continue name
Carry on writing standard name.
key will
51