Herunterladen Inhalt Inhalt Diese Seite drucken

Assembly - Parkside PNTS 1400 C1 Originalbetriebsanleitung

Nass- und trockensauger
Vorschau ausblenden Andere Handbücher für PNTS 1400 C1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

particularly not at the eyes and ears;
there is a risk of injury.
Do not vacuum any hot, incandescent,
flammable, explosive materials, or
those which endanger health. This in-
cludes hot ashes, petrol, solvents, acids
or caustic solutions. Personal injury
could occur.
Nozzles and suction tubes must not
reach head level whilst in use. Personal
injury could occur.
To avoid accidents and injuries
from electric shocks:
Ensure that the mains cable is not
damaged by being pulled over sharp
edges, by jamming, or by pulling on
the cable.
Before each use, check the power sup-
ply lead and the extension cable for
damage and ageing. Do not use the
equipment if the cable is damaged or
worn. Danger of electric shock hazard.
If the power cable for this equipment is
damaged, it must be replaced by the
manufacturer, a customer service agent
of the same or a similarly qualified per-
son in order to prevent hazards.
Switch the machine off and pull the
plug under the following circumstances:
- when you are not using the device,
- transporting it or leaving it unat-
tended;
- when you are checking the device,
cleaning it or removing blockages;
- when you are carrying out cleaning
or maintenance work or replacing
accessories;
- when the power or extension cable
is damaged; after contact with for-
eign bodies or in case of abnormal
vibration.
Do not use the cable to pull the plug
out of the socket. Protect the cable from
heat, oil, and sharp edges.
Make sure that the mains voltage cor-
responds with the information on the
rating plate.
Only plug the appliance into a socket
which is safeguarded by at least 16 A.
For use in a humid environment (e.g.:
in a bathroom) and when wet vacuum-
ing, plug into a socket with a residual
current safeguard device (circuit break-
er) with a rated residual current of no
more than 30 mA
The following states how damage
to the appliance and possible in-
jury to people can be avoided:
Ensure that the machine is correctly
assembled and the filters are in the cor-
rect position.
Do not use without the filter. This could
damage the machine.
Only use replacement parts and acces-
sories delivered and recommended by
our Service Centre (see "Replacement
parts / Accessories"). The use of parts
by other manufacturers immediately
renders the guarantee void.
Only have repairs carried out at our
authorised customer service points.
Observe the instructions for cleaning
and maintenance of the machine.
Store the appliance in a dry place and
out of reach of children.

Assembly

Pull out the mains plug.
Danger of electric shock.
1. Place the 4 steering castors (11) onto
the mounts on the stainless steel con-
tainer (9). Attach each steering castor
with a crosshead bolt (11a).
2. Fit the bow handle (1) onto the two
GB
IE
CY
7

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis