Storage; Trouble Shooting; Disposal/Environmental Protection; Fault Correction - Parkside PNTS 1400 C1 Originalbetriebsanleitung

GB IE CY

Storage

1. Release both locking levers
( 14)
the bow handle (1).
2. Wind the power cable (5)
around the power cable holder
(4).
3. The attachment ports (13/16)
serve to store the telescopic
suction hose (17), suction hose
(19) and nozzles (25/26).
4. Store the appliance in a dry
place and out of reach of chil-
dren.

Trouble shooting

Problem
Device does not start
Low or lack of suction
10
and fold down
Possible cause
Mains voltage is not present
Defective on/off switch
( 6)
Worn carbon brushes
Defective motor
Hose system ( 19) or jets
( 25/26) blocked
Suction pipe ( 17)
assembled incorrectly
Container ( 9) open
Container ( 9) full
Filter ( 21/23/24) full or
clogged
Disposal/Environmental
protection
Be environmentally friendly. Return the tool,
accessories and packaging to a recycling
centre when you have finished with them.
Machines must not be disposed of
with household refuse.
Take the machine to a recycling point. The
waste plastic and metal parts can be sepa-
rated, accurately graded and passed on for
recycling. Contact our Service Centre for
more details. Defective units returned to us
will be disposed of for free.

Fault correction

Check plug socket, cable,
line, plug and fuse, where
appropriate, repair through
electrical specialist
Repair through customer service
Remove obstructions and
blockages
Assemble suction pipe correctly
Close container
Empty container
Empty, clean or replace filter