Cleaning The Folded Filter; Cleaning The Air Filter; Storage; Disposal/Environmental Protection - Parkside PAS 1200 C2 Originalbetriebsanleitung

• Remove the container lid (
empty the metal container (
Clean the metal container (
water and allow it to dry.
• After removing the suction
hose ( 15), clean the dust and soot
particles from the connections. This
ensures that the suction hose (
can be inserted again easily.
• Clean the folded filter (

"Cleaning the folded filter").

B C D
Cleaning the folded filter
Replace the pleated filter (18) if it
L M N
is worn, damaged or heavily soiled
(see "replacement parts").
V W X
1. Take off the container cover (10).
2. Rotate the folded filter (18) in an anti-
clockwise direction and remove it.
3. Tap out the pleated filter (18) and clean
it with a paintbrush or hand brush.
Don't wash the pleated (18) fil-
ter in water.
4. Place the folded filter (18) on the inver-
ted container cover (10).
6. Screw in the folded filter (18) tightly in
a clockwise direction.
The folded filter (18)
must rest on the con-
tainer cover (10).
Then press down the
switch of the safety switch (19).
The arrow on the folded filter (18) must
be at the same height as the arrow on
the label of the container cover (10).

Cleaning the Air Filter

1. Take off the container cover (10) and
the folded filter (
2. Take the air filter (20) out of the filter
housing (21).
10) and
13).
13) with
15)
18) (see
E F G
O P Q
Y Z
19
18).
3. Clean the filter (20) with soap and wa-
ter and allow it to dry in the air.
4. Place the air filter (20) back in the filter
housing (21).

Storage

• To store, wind the power cord (1)
around the retaining bracket (6) on the
container lid (10).
• Insert the rotatable plastic end piece of
the suction tube (15) in the holder pro-
H I
vided (4) and tighten it. Place the other
end of the hose on the holder (2).
• Place the suction tuber (16) on the reel
R S
with attachment port (14).
• Keep the equipment in a dry place, out
of reach of children.
Disposal/Environmental
protection
Be environmentally friendly. Return the tool,
accessories and packaging to a recycling
centre when you have finished with them.
Machines must not be disposed of
with household refuse.
Take the machine to a recycling point. The
waste plastic and metal parts can be sepa-
rated, accurately graded and passed on
for recycling. Contact our Service Centre
for more details.
Defective units returned to us will be dis-
posed of for free.
GB
J
T
MT
37