Setting Sag - SR Suntour AIR SPRING SERIE Bedienungsanleitung

SR SUNTOUR - OWNERS MANUAL
Qloc hub requirements
According the to function of our Qloc system there are some requirements hub's have to fullfil to
make this system work smoothly. Please find the explanation below:

SETTING SAG

The SAG is the compression which is just caused by the body weight and seating position of the
rider and not as a result of riding. Every rider has a different weight and seating position, therefore
the fork will sag more or less. To assure a proper function of your fork and not to interfere the
performance of it, setting a proper SAG is the only way to find the right air pressur for your fork.
Travel
80mm
100mm
120mm
140mm
ZIPTIE
14
English
Non-Recommend Shape
Limited Function
Edges within the hub can
cause the axle to get stuck
SAG in % SAG in mm
15% - 20% 12mm - 16mm
15% - 20% 15mm - 20mm
15% - 20% 18mm - 24mm
20% - 25% 28mm- 35mm
AXON / EPICON / RAIDON air
MAX AIR
Models PRESSURE
[ psi ]
AXON 165
EPICON 180
RAIDON air 180
ZIPTIE
Recommend Shape
Full Function
No Edges
MAX AIR
PRESSURE
[ bar ]
11.4
12.4
12.4
SAG
ZIPTIE