Rebound Damping Adjust; Setting Sag - SR Suntour nrx Benutzerhandbuch

SR SUNTOUR - OWNERS MANUAL

REBOUND DAMPING ADJUST

The rebound function of SR SUNTOUR hydraulic suspension forks allows you to tune your fork ac-
cording to your personal preferences and the terrain you are riding on. This function enables you
to control the speed of your fork's rebound after it's being compressed.
If you are going to ride on a terrain with a lot of small and fast bumps, we recommend to increase
your forks rebound speed. Otherwise it implies the risk that your front wheel loses its contact to
the ground. If you are going to ride on a terrain with a lot of big and slow bumps, we recommend
to decrease your forks rebound speed.
NRX S RLD LTD
NRX S RLD
NRX S LOD
In order to increase the rebound speed
of your fork you have to turn the adjus-
ter knob counter clock-wise. To decrease
the speed you have to turn it clockwise.
HOW TO ADJUST THE AIR PRESSURE

SETTING SAG

The SAG is the compression which is just caused by the body weight and seating position of the
rider and not as a result of riding. Every rider has a different weight and seating position, therefore
the fork will sag more or less. To assure a proper function of your fork and not to interfere the
performance of it, setting a proper SAG is the only way to find the right air pressur for your fork.
Travel SAG in %
63mm 15% - 20%
75mm 15% - 20%
100mm 15% - 20%
120mm 20% - 25%
SAG in mm
9mm - 13mm
11mm - 15mm
NCX / NCX LITE
15mm - 20mm
18mm- 24mm
NRX / NCX LITE/ NCX / CR9
MAX AIR
Models PRESSURE
[ psi ]
NRX 150
150
CR-9 150
Adjuster
Knob
NRX / NCX / CR9
MAX AIR
PRESSURE
[ bar ]
10.3
10.3
10.3
English
11