SR Suntour AIR SPRING SERIE Bedienungsanleitung Seite 9

SR SUNTOUR - OWNERS MANUAL
Thread the cable through the outer casing
stopper and through the cover unit hole.
Tension the cable slightly and tighten it
using a 2mm Allen key.
Cut the cable to a proper length to make
sure it will still fit into the sliding carriage.
This pictures shows the remote lock unit
in the „OPEN" position. The cable is cut
perfectly, still fits into the sliding carriage.
Reassemble the plastic cover cap using a
2.5mm Allen key. Tighten it slightly.
If the fork does not lock, the tension of the
cable is probably too low. In this case you
have to increase the tension of the cable
by turning the adjustment barrel counter-
clockwise. If the cable's tension is too high
and the fork does not unlock, you have to
turn the adjust barrel clockwise.
8
English
AXON / EPICON / RAIDON air
2mm
0.5 Nm
CUT
7mm
2.5mm
0.5 Nm
Adjustment
Barrel