Setting Sag; Fork Maintenance - SR Suntour DUROLUX Bedienungsanleitung

SR SUNTOUR - OWNERS MANUAL

SETTING SAG

The SAG is the compression which is just caused by the body weight and seating position of the
rider and not as a result of riding. Every rider has a different weight and seating position, therefore
the fork will sag more or less. To assure a proper function of your fork and not to interfere the
performance of it, setting a proper SAG is the only way to find the right air pressur for your fork.
Travel SAG in %
100 mm 15 %–20 %
120 mm 20 %–25 %
140 mm 20 %–25 %
160 mm 20 %–25 %
ZIPTIE

FORK MAINTENANCE

SR SUNTOUR forks are designed to be nearly maintenance free. However, as long as moving parts
are exposed to moisture and contamination, the performance of your fork might be reduced after
several rides. To maintain a high performance, safety and a long life of your fork, a periodic main-
tenance is required.
Please keep in mind that a fork which has not been serviced in accordance with
the maintenance instructions will loose its warranty!
Never use a pressure washer or any water under pressure to clean your fork as
water may enter the fork at the dust seal level.
We recommend that your fork is being serviced more fequently as indicated
below if you ride in extreme weather (winter time) and terrain conditions.
Any case you may feel that your forks performance has changed or handles dif-
ferently immediately call on your local dealer to inspect your fork.
SAG in mm
Models
15 mm–20 mm
Durolux
24 mm–30 mm
28 mm–35 mm
32 mm–40 mm
ZIPTIE
DUROLUX / DURO FR20 / DURO
MAX AIR MAX AIR
PRESSURE PRESSURE
[ psi ]
150
ZIPTIE
[ bar ]
10.3
SAG
13
English