Rebound Damping Adjust; Remote Travel Adjust Function; Epicon Xc Tad / Xc Tad 15Ql - SR Suntour AIR SPRING SERIE Bedienungsanleitung

SR SUNTOUR - OWNERS MANUAL

REBOUND DAMPING ADJUST

The rebound function of SR SUNTOUR hydraulic suspension forks allows you to tune your fork ac-
cording to your personal preferences and the terrain you are riding on. This function enables you
to control the speed of your fork's rebound after it's being compressed.
If you are going to ride on a terrain with a lot of small and fast bumps, we recommend to increase
your forks rebound speed. Otherwise it implies the risk that your front wheel loses its contact to
the ground. If you are going to ride on a terrain with a lot of big and slow bumps, we recommend
to decrease your forks rebound speed.
ALL AXON RLD MODELS
ALL EPICON RLD / EPICON LOD MODELS
ALL RAIDONair RLD / LOD MODELS
In order to increase the rebound speed
of your fork you have to turn the adjus-
ter knob counter clock-wise. To decrease
the speed you have to turn it clockwise.

EPICON XC TAD / XC TAD 15QL

The travel adjust function of your fork enables you to change the travel of your fork in a range
of 40mm. SR SUNTOUR's travel adjust works stageless, therefore you can choose every travel in-
between your fork's maximum and minimum travel. The travel adjust cartrige itself works with
an pneumatic system. While changing the travel air will get transferred from one chamber to the
other. Usually the air valve(air pressure adjust) is located at the right side of the fork's crown. Be-
cause of the travel adjust system, the air valve cap sits at the lower end of your bottom case.
12
English
Press the Travel Adjust Lever down-
wards and hold it. Compress your
fork. Release the lever again. Disbur-
den your fork.
AXON / EPICON / RAIDON air

REMOTE TRAVEL ADJUST FUNCTION

Press
Adjuster
Knob