Product Identification - ABB 2600T Serie Bedienungsanleitung

1.5 Product identification

The instrument is identified by the data plates shown in Figure 3.
The certification plate (ref. A): contains the certification related
parameters for use in Hazardous area.
The Nameplate (ref.B), always made of AISI 316 ss, provides
information concerning the model code, maximum working
pressure, range and span limits, power supply, output signal,
diaphragms material, fill fluid, range limit, serial number, maximum
process working pressure (PS) and temperature (TS).
The Tag plate, instead, provides customer tag number and
calibrated range.
Both certification and tag plates are supplied self-adhesive
attached to the electronics housing, as standard. Option I2 allows
to select these plates as metal AISI 316 ss fastened to the
electronics housing with rivets or screws.
The instrument may be used as a pressure accessory (category III)
as defined by the Pressure Equipment Directive 97/23/EC. In this
case, near the CE mark, you will find the number of the notified
body (0474) that have verified the compliance. 266 pressure
transmitters are in compliance with EMC 2004/108/CE*.
The certification plate (ref.A) shown here is issued by ABB S.p.A,
22016 Tremezzina, Italy, with the numbers:
— FM09ATEX0023X or IECEx FME 09.0002X (Ex d)
— FM09ATEX0024X or IECEx FME 09.0003X (Ex ia)
— FM09ATEX0025X or IECEx FME 09.0004X (Ex nL)
CE-Identification number of the notified bodies to Pressure Equipment
Directive: 0474, to ATEX certification: 0722, to IECEx certification:
IT/CES/QAR07.0001/02.
ABB S.p.A.
Tremezzina (Co) Italy
0474
0722
Figure 1: Product identification
*
C and F sensors on gauge and absolute pressure transmitters are in compliance with IEC61000-4-6 with B criteria
ABB S.p.A.
Made in Italy
PRODUCT CODE
SEAL-H
SPEC.REQUEST
SENSOR DIAPH.-FILL
FLANGE/CONN.-GASKET/S
H DIAPH.-FILL
L DIAPH.-FILL
POWER SUPPLY
TS
MWP/OVP
LRL/URL
SPAN LIMITS
Calib.
Range
2600T
Tag
Number
PRESSURE TRANSMITTER
II 1/2 G Ex d IIC T6 - II 1/2 D Ex tD A21 IP67
T85°C FM09ATEX0023X - IECEx FME09.0002X
(-50°C<Ta<+75°C) POWER SUPPLY 42 Vdc/2W Max
II 1 G Ex ia IIC T6 - II 1/2 G Ex ia IIC T6 -
II 1 D Ex iaD 20 T85°C and II 1/2 D Ex iaD 21 T85°C
for electrical parameters see cert. FM09ATEX0024X
IP67 - IECEx FME09.0003X "FISCO Field Instrument"
II 3 G Ex nL IIC T6 - II 3 D Ex tD A22 IP67 T85°C
Ui = 42Vdc Ii < 25mA Ci < 13nF Li < 0,22mH
for electrical parameters see cert. FM09ATEX0025X
IECEx FME09.0004X "FNICO Field Instrument"
The certification plate (ref.A) shown here may also be issued for
ABB-APR, 32425 Minden, Germany, with the numbers:
— FM09ATEX0068X or IECEx FME 09.0002X (Ex d)
— FM09ATEX0069X or IECEx FME 09.0003X (Ex ia)
— FM09ATEX0070X or IECEx FME 09.0004X (Ex nL)
CE-Identification number of the notified bodies to Pressure Equipment
Directive: 0045, to ATEX certification: 0044, to IECEx certification:
DE/TUN/QAR06.0012/01.
The same certification plate (ref.A) can be issued for
ABB India Limited, 560058 Bangalore, India,
— FM11ATEX0035X (Ex ia)
— FM11ATEX0036X (Ex d)
— FM11ATEX0037X (Ex nL)
CE-Identification number of the notified bodies to ATEX certification:
1725.
ABB Engineering Limited,
this certification plate (ref. A), as well. The numbers are:
— FM11ATEX0046X or IECEx FMG 11.0019X (Ex ia)
— FM11ATEX0047X or IECEx FMG 11.0018X (Ex d)
— FM11ATEX0048X or IECEx FMG 11.0020X (Ex nL)
CE-Identification number of the notified bodies to ATEX certification:
1725.
SERIAL\NUMBER
SEAL-L
HW Rev.
MD:
PED:
OUTPUT SIGNAL
PS
Local keys below label
General Purpose IP67 Max.Supply Voltage 42 Vdc
XP (US) CL I/DIV1/GP ABCD, DIP CL II, III /DIV1/GP EFG,
FM
XP (Canada) CL I/DIV1/GP BCD, DIP CL II, III /DIV1/GP EFG,
US C
APPROVED CL I, ZONE 1, AEx/Ex d IIC T4 -50°C<Ta<+85°C
ENCL 4X T AMB=85°C "Seal not required" - "DUAL SEAL"
IS/Sec. Intrinseque (Entity) CL I, ZONE 0 AEx/Ex ia IIC T6,T5,T4
FM
CL I/DIV1/GP ABCD IS - CL II/DIV1/GP EFG - CLIII DIV1 when
US C
conn. per dwg DH 3173 ENCL 4X "FISCO Field Instrument"-"DUAL SEAL"
APPROVED
CL I, ZONE 2 AEx nC IIC T6,T5,T4
FM
CL I, ZONE 2 Ex nL IIC T6,T5,T4
US C
CL I/DIV2/GP ABCD NIFW when connected per drawing
APPROVED
DH 3173 ENCL 4X "FNICO Field Instrument" - "DUAL SEAL"
2600T Series Pressure transmitters | SOI/266-XC Rev. J 3
1 Introduction
with the numbers:
Shanghai 201319, P.R. China, can issue
Ref. B
Ref. C
Ref. A