Changing Lights - hanseatic SY-3503C-E4-C55-L52-600 Gebrauchsanleitung

(18) (19)
6. Place a grease filter (18) with the pins
into the openings.
7. Push the lock (19) down; snap the
grease filter (18) shut and release the
lock again.
8. Repeat the last two steps for the second
grease filter.
9. Switch the power back on.
10. Dispose of the used charcoal filters with
household waste.

Changing lights

CAUTION
Risk of injury!
Should one of the LEDs stop working,
■
it must be changed by an authorised
service technician.
Note for the service technician: This
exhaust hood requires LEDs with the
ILCOS D-Code
DSR-1.5/65-S-64; 2x 1.5 W; DC 12V.
Care and maintenance
Page EN-11